Electronics & Innovation, Ltd.
150 Research Blvd.
Rochester, NY 14623
Phone: 585.214.0598
Fax: 585.214.0580
Email: sales@eandiltd.com • Website: www.eandiltd.com
All Categories > Phased Array Systems > Phased Array Systems > Item # 100A2  


Item # 100A2, 2 Channel 100 Watt Phased Array RF System

The 100A2 is a broadband solid state amplifier system covering the frequency spectrum from 300 KHz to 12 MHz. Each channel is rated at 100 watts of RF power with low harmonic and intermodulation distortion. Over 150 watts of saturated power can be produced with increased distortion products. A highly linear Class A design, the 100A2 will amplify inputs of AM, FM, SSB, pulse and any complex modulation signals. The amplifier has 50 dB gain it is unconditionally stable and will not oscillate even with combinations of mismatched source and load impedance. It is protected against failure due to output load mismatch and/or overdrive.
  • Dual Channel
  • 100 Watts/Channel
  • Class A Linearity
  • VSWR Measurements





Primary Performance Characteristics  · Specifications  · Form Factor

Primary Performance Characteristics

# Channels
2

Rated Power
100 Watts/Channel

Start Frequency
300 kHz

Stop Frequency
12 MHz

Power Gain
50 dB

Class of Operation
Class A


Specifications

Saturated Power Output
300 KHz to 12 MHz > 120 W Per Channel

Nominal Gain
50 dB

Gain Flatness
±1.5 dB

Input Power for Rated Pout
1 mW

Input Impedance / VSWR
50 Ω / 1.5:1 maximum

Output Impedance / VSWR
50 Ω / 2:1 maximum

Harmonic Level
-25 dBc

Ruggedness of Amplifier
oo:1 VSWR

Stability
Unconditional into any passive load or reactive load.

Protection
Input: Unit will withstand input signal of +13 dBm without damage (1.0 V rms) max. and infinite load VSWR.

Front Panel Meters
Two displays indicate up to 200 Watts into 50 Ω displaying forward and reflected power simultaneously for each channel

Third Order Intercept Point
IP3 ~ 59 dBm

AC Input
100 to 240 VAC, 47 to 63 Hz

Temperature Range
0 to 40 ºC

Cooling
Forced Air

Connectors
BNC

Power Requirements
100 to 240 VAC, 47 to 63 Hz

Operating Temperature
0 to 40 ºC

Dimensions
5.2 x 16.5 x 18.1 in


Form Factor

Height
5.25 in
133.35 mm

Width
16.62 in
422.15 mm

Depth
20 in
508 mm

Weight
63 lb
28.6 kg