6 Channel 50 Watt RF Phased Array System

All Categories > Phased Array Systems > Phased Array Systems > Item # 50AB6


	Item # 50AB6, 6 Channel 50 Watt RF Phased Array System

larger image

The E&I 50AB6 is a broadband solid state amplifier system covering the frequency spectrum from 500 KHz to 3 MHz. It is rated at 50 watts of RF power per channel. A quasi linear Class AB design, the 50AB6 will amplify inputs of AM, FM, SSB, pulse and any complex modulation signals. Each channel has 30 dB gain, that is variably controlled by a 0 to 10 Volt signal

6 Channels
50 Watts/Channel
0 to 40 dB gain
DC Input Control

Primary Performance Characteristics · Specifications · Form Factor

Primary Performance Characteristics

# Channels		6

Rated Power		50 Watts/Channel

Start Frequency		500 kHz

Stop Frequency		3 MHz

Power Gain		30 dB

Class of Operation		Class AB

Specifications

Gain Flatness		±1.5 dB

Harmonic Level		-15 dBc

Connectors		BNC - RF, SMB - Gain Control

Power Requirements		100 to 264 VAC, 47 to 63 HZ

Operating Temperature		0 to 40 ºC

Form Factor

Height		51 in 1,295 mm

Width		23.25 in 591 mm

Depth		30 in 762 mm

Weight		220 lb 100 kg

Item # 50AB6, 6 Channel 50 Watt RF Phased Array System

# Channels

Rated Power

Start Frequency

Stop Frequency

Power Gain

Class of Operation

Gain Flatness

Harmonic Level

Connectors

Power Requirements

Operating Temperature

Height

Width

Depth

Weight