Electronics & Innovation, Ltd. - Power Indicators

E&I's new line of power indicators enable the measurement of forward and reflected power in one instrument - allowing you to quickly and accurately determine how much power is being delivered to your load. Measuring RMS power to an accuracy of ± 3% over the entire frequency range, these portable units are self-contained with easy to read LCD displays.

Our line of power indicators range in different power levels and frequency ranges to meet your specific requirements.

Broadband power measurement
Simultaneous forward and reflected power measurement
Low insertion loss

Unit of Measure

Items	PI-2 PI-2 Power Indicator	PI-10 PI-10 Power Indicator	PI-30 PI-30 Power Indicator	PI-150 PI-150 Power Indicator
Start Frequency	N/A 10 kHz	N/A 100 kHz	N/A 1 MHz	N/A 1 MHz
Stop Frequency	N/A 2 MHz	N/A 10 MHz	N/A 30 MHz	N/A 150 MHz
Rated Power Output	N/A 2000 W	N/A 200 W	N/A 300 W	N/A 50 W
Input Impedance / VSWR	N/A 50 Ω / 1.25:1 maximum
Output Impedance / VSWR	N/A 50 Ω / 1.25:1 maximum
Height	N/A 130 mm
Width	N/A 150 mm
Depth	N/A 250 mm
Dimensions	N/A 130 x 150 x 250 mm
Detailed Description	N/A The PI-2 RF power indicator is used to measure the RF level of signal sources in the 10 KHz to 2 MHz range. Measuring RMS power to an accuracy of ± 3% over the entire frequency range, this portable unit is self-contained with an easy to read LCD display. The PI-2 measures forward and reflected power enabling you to accurately determine the power delivered to the load in your system. The PI-2 operates over the entire frequency range of 10 KHz - 12 MHz and up to power levels of 2000 watts.	N/A The PI-10 RF power indicator is used to measure the RF level of signal sources in the 100 KHz to 10 MHz range. This portable unit is self-contained with an easy to read LCD display, no tuning or any other form of adjustment is required. The PI-10 measures forward and reflected power of the system that it is inserted into, enabling you to quickly and accurately determine the power delivered to the load in your system. The characteristic impedance of the instrument is 50 ohms. The PI-10 operates up to power levels of 200 Watts.	N/A The PI-30 RF power indicator is used to measure the RF level of signal sources in the 1 to 30 MHz range. This portable unit is self-contained with an easy to read LCD display, no tuning or any other form of adjustment is required. The PI-30 displays and measures forward and reflected power, enabling you to quickly and accurately determine the power delivered to the load in your system. The characteristic impedance of the instrument is 50 ohms. The PI-30 operates up to power levels of 300 Watts.	N/A The PI-150 RF power indicator is used to measure the RF level of signal sources in the 1 - 150 MHz range. This portable unit is self-contained with an easy to read LCD display, no tuning or any other form of adjustment is required. The PI-150 displays and measures forward and reflected power, enabling you to quickly and accurately determine the power delivered to the load in your system. The characteristic impedance of the instrument is 50 ohms. The PI-150 operates up to power levels of 50 Watts.